Showing posts with label backup camera. Show all posts
Showing posts with label backup camera. Show all posts

Audiovox ACA250 Wireless Vehicle Rear Observation System Review

Audiovox ACA250 Wireless Vehicle Rear Observation System
Average Reviews:

(More customer reviews)
To start off with this product did what I expected.
I did call tech support and they explained that this is designed to transmit on an average of 15 feet; basically it is designed for cars and SUV's. Something about the FCC and the legal range. I have an F250 and I was worried about the last two reviews. It made sense that it would not work in a bus or trailer, it's not made for that.
Install was easy, the included Scotchloks worked fine. Yes the wire was a bit thin but they included the red ones for small wire, I just doubled up the camera power wires.
My kit included a long lead to power the monitor in case of interference and the Tech explained that in some areas there is more then other. I had a VR3 product before and they wanted $19.95 for the same lead. The camera is also metal, my VR3 camera cracked in a few months. They also included special anti theft screws so no-one can just take the camera.
The monitor has a swivel base so I mounted it next to my rear view mirror. Ran the power wires to the fuse box and I was done. I do not get the flickering, but every now and then I can see someone else's camera from a house or security camera. I had this with the VR3 piece too. I am guessing if it was 5.8Mghz it would see other 5.8 stuff too ???
The camera had a much better viewing angle then the other and the night vision helps a lot too because the back up lights on my truck are useless. I can also see my hitch with no problem at all. There is a little static but not bad. We put one in a 4Runner and that one works great.
For the price I am happy with it.


Click Here to see more reviews about: Audiovox ACA250 Wireless Vehicle Rear Observation System

AUDIOVOX ACA250 WIRELESS VEHICLE REAR OBSERVATION SYSTEM

Buy NowGet 33% OFF

Click here for more information about Audiovox ACA250 Wireless Vehicle Rear Observation System

Read More...

PYLE PLCM10 License Plate Mount Rear View camera with Night Vision Review

PYLE PLCM10 License Plate Mount Rear View camera with Night Vision
Average Reviews:

(More customer reviews)
Bottom line up front: Don't expect a $30 CMOS backup camera to perform like your $600 camcorder.
This camera is good for the price. I installed it rather quickly in conjunction with my Pioneer AVIC-Z110BT. It added a Pyramid 10-amp noice filter ($3) as close to camera as possible to ensure it got clean power. It works fine. I can see anything behind me, day or night. Between the IR illuminators on the camera and your backup lights, anything close enough to be of concern at normal reversing speeds are illuminated.
After careful aiming, I know right where the "sweet spot" is for backing closse to other car's bumper and other obstacles behind me and still have a save 6-12" buffer. I now get in and out of tight spots with ease.
Important notes:
- Don't expect this to look like HDTV. It's a $30 CMOS camera.
- Use the $3 noise filter.
- Route your cables carefully. You should ground the negative lead as close to the camera aspossible and run the positive lead to your choice of power supply (the reverse lights, of you want the camera on only when you're backing, or an accessort power, if you wnat it on when the car's on - as in my case where my head unit has a "rear view" mode for viewing trailers and such while moving forward). If conecting to accessory power, you'll likely have to extend the cable to the front of the vehicle. Keep it a few inches from the from the video cable, and make sure both the video and power cable cross each other and other cables at 90-degrees, and avoid parralle runs. Also, be prepared to extend the video cable. I had to add a 6-foot extension to mine in order to get it to reach the head unit.
I don't understand wht someone would spend over $100 for a higher quality camera for the purpose of just backing up, unless they're using it for some sort of high-speed reversing and/or using a really large screen, in which case I would personally use a 0 lux securty-type camera with a differnt mounting location.

Click Here to see more reviews about: PYLE PLCM10 License Plate Mount Rear View camera with Night Vision

This rear view camera mounts easily above your license plate and outputs crystal clear video over an RCA jack. Connect to a monitor in your car, and you'll be able to see everything behind you on the screen! Perfect for backing into tight spots or moving in reverse when visibility is limited – the PLCM10 is like an extra eye. And this model comes with nightvision LEDs, which illuminate the area behind you at night. This small and durable unit will keep you safe and secure because you'll always know what's going on around you.

Buy NowGet 42% OFF

Click here for more information about PYLE PLCM10 License Plate Mount Rear View camera with Night Vision

Read More...