Showing posts with label amplifier. Show all posts
Showing posts with label amplifier. Show all posts

Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver Review

Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver
Average Reviews:

(More customer reviews)
This Sherwood (noted brand years ago, now mysterious) might be a decent bargain for twice the money. It's stripped down by present standards -- two channels only, no phonograph input. It's dead quiet and extremely clean sounding. I can't hear any emphases or dead spots in the frequencies. The tuner is exceptionally good; I am surprised at the success I'm having with it in a poor reception area, with only the antennas that are supplied. Appearance and quality are fine: nice black steel case, solid buttons, one big old volume knob. It was all I needed, so I'm very pleased. Going to get another for a computer amp.

Click Here to see more reviews about: Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver

Sherwood's incredibly affordable RX-4105 offers integrated preamplification and amplification, inputs for numerous audio source components, and advanced radio tuning and station access. The receiver delivers 100 watts RMS per channel x 2 for strong, clear sound across the audible spectrum--even at low listening levels. The company has lowered the amplifier's distortion relative to the previous model (the RX-4105), to less than 0.08 percent, while also giving the receiver a new layout borrowed from its higher-end components.The RX-4105 uses totally discrete amplifiers for all channels (TDAS) to maintain its high power and low distortion. Use the receiver's A and B clip-type speaker outputs to power 2 different rooms, or to biwire a pair of speakers for more efficient amplification (with A outputs driving the woofers, for instance, and the B outputs driving the tweeters--make sure your speakers are compatible if this is a key feature for you).The receiver also offers a handy 25-key remote control and switching for 2 pair of loudspeakers. Audio inputs switch between and amplify up to 4 additional components, including 2 requiring both inputs and outputs (such as a cassette deck and a VCR). The built-in AM/FM tuner features 30 station presets and auto station setup.Other features include bass and treble tone controls, a dimmable fluorescent display, and a .25-inch headphone jack for private listening.What's in the Box Sherwood RX-4105 receiver, remote control, AC power supply cord, FM indoor antenna, AM loop antenna set, and owner's manual.

Buy NowGet 5% OFF

Click here for more information about Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver

Read More...

Sony XM-1652Z - Amplifier - Xplod - 2-channel - 380 Watts x 2 Review

Sony XM-1652Z - Amplifier - Xplod - 2-channel - 380 Watts x 2
Average Reviews:

(More customer reviews)
i got the amp about 3 days ago. fast shipping . The amp pushes 2 10 in sony explodes pretty good. I still want more. Dont get mewrong this amp packs a punch . great amp. would recomend to anyone who wants good bass for a cheap price.

Click Here to see more reviews about: Sony XM-1652Z - Amplifier - Xplod - 2-channel - 380 Watts x 2

Sony Xplod 2 Channel 1000 Watt Car Stereo Amplifier. Factory Recertified by Sony to New condition with full factory warranty by Sony for 90 days Guaranteed.

Buy Now

Click here for more information about Sony XM-1652Z - Amplifier - Xplod - 2-channel - 380 Watts x 2

Read More...

Dual XPA2500 300 Watt Amplifier Review

Dual XPA2500 300 Watt Amplifier
Average Reviews:

(More customer reviews)
I'm definitely not an amp expert. I got some free subs and bought this cheap amp from WalMart because I wasn't willing to spend a fortune on a car sound system. This amp was easy to hook up and after about 2 years I'm starting to have heating problems. It's the beginning of spring now and on warm days the amp will stay on for about 10 minutes then start cutting on and off. I have it well ventilated and everything is hooked up right. I would suggest this product for anyone wanting to install sub woofers in their car for the first time. I would NOT suggest buying this used. It doesn't really surprise me that something from WalMart would do this, but other than heating issues after about two years, this is a good amp.

Click Here to see more reviews about: Dual XPA2500 300 Watt Amplifier

Dual's XPA2500 300 Watt Amplifier features PWM MOSFET power supply, 2 ohm stable stereo operation, class AB output design, stereo/bridged simultaneous operation, bridgeable operation for subwoofer applications, extruded aluminum heatsink, barrier strip connection terminals. side mounted controls, auto-reset thermal overload protection, speaker short circuit protection, reverse polarity protection and bi-color LED status indicator.

Buy NowGet 56% OFF

Click here for more information about Dual XPA2500 300 Watt Amplifier

Read More...

Kicker 08S12L74 Solo-Baric L7 12-Inch 300mm 4-Ohm DVC Subwoofer Review

Kicker 08S12L74 Solo-Baric L7 12-Inch 300mm 4-Ohm DVC Subwoofer
Average Reviews:

(More customer reviews)
This is the second pair of Solo Baric Square subs that I've owned, my first being older L5s w/ a 1,000w Xplod amp. This time I went ahead a bought the higher model L7, still in a 12" setup. I have them wired down to 1 Ohm on a brand new 1500w Crunch amp in a dual slot box w/4ga wiring. These subs hit much harder and clearer than any pair of subs that I have ever heard(Almost as loud as my buddy's 6-12" CVR bandpass setup w/ two 1500w crunch amps) The Powerzone line from Crunch is AMAZING, I know they're not a big name brand but their amps are built way above standard and I know that they can take a punishment(I knew a guy that had the amp for 9 months running 4 DVC Pioneer subs and had it wired at 0.5 Ohm, the amp last over 9 months before burning up, in which he had it replaced for free by Crunch. The amp is capable of making over 1800w at 1ohm. The Kicker L7s can handle much more power but I want to make sure that my investment will last. HIGHLY recommended, with the highly reinforced surround it's extremely unlikely you'll flex the sub, making no reason not to buy SQUARE (=

Click Here to see more reviews about: Kicker 08S12L74 Solo-Baric L7 12-Inch 300mm 4-Ohm DVC Subwoofer

In 2008 the newest KICKER Solo-Baric L7 Subwoofer remains one of the most capable subwoofers on Earth, with great looks and great sound. And it's the only patented one that provides more cone, more air, and more decibels.

KICKER engineers left it all on the table for this redesigned Solo-Baric L7, taking cues from the award-winning original that debuted as groundbreaking at the turn of the millennium, and then improving on them. Let there be no doubt, it's the most complete KICKER subwoofer ever developed.
Available in 8-, 10-, 12-, and 15-inch models, the Solo-Baric L7 still revolves around the breakthrough SoloKon, the one-piece, injection-molded cone with full-coverage back bracing that pushes more air and creates louder bass than any like-size round subwoofer. It's good enough that KICKER uses SoloKon across the board as the cornerstone for each subwoofer in the KICKER bass-making family.
SoloKon may be a rock star, but it's the unshakeable motor structure behind the scenes that propels it to the forefront. Minor tweaks have given the motor an outstanding rep--dual high-temp voice coils, poly-cotton semi-progressive spider, Spiralead tinsel-lead technology, highly-efficient UniPlate pole-piece/back plate, and a heat-reducing T-cut top plate for enormous power handling. And it's never been cooler with a new solid pole piece that disperses more heat than ever before, and more venting near the SoloKon back brace and spider landing.
The distinctive cast-aluminum basket with spring-loaded terminals wraps around and protects these specialized inner workings, with the Solo-Baric crest branded into the back plate.
The Solo-Baric L7 remains available in 2-Ohm or 4-Ohm DVC and conducts business from a sealed or vented box application.
KICKER S12L7 Features
SoloKon for strength and accuracy
T cut top plate for high magnetic field strength
Aluminum coil former (same as SoloX)
Pole venting at cone brace
Stitched and glued tinsel leads enable high excursion
Ribbed Santoprene surround

What's in the Box S12L7 subwoofer (4-ohm impedance), Mounting hardware, Speaker wire, User's manual

Buy NowGet 54% OFF

Click here for more information about Kicker 08S12L74 Solo-Baric L7 12-Inch 300mm 4-Ohm DVC Subwoofer

Read More...

Alpine SPR-13S 5-1/4" Component 2-Way Speaker (Pair) Review

Alpine SPR-13S 5-1/4 Component 2-Way Speaker (Pair)
Average Reviews:

(More customer reviews)
Runs with my Alpine F550 4 channels amp, and the quality is perfect, with great presence of all instruments. The player is an Alpine too, and the cables are Monster 201. I really like quality, and I was wondering to buy a Diamond kit, but it was too expensive, so I decided to buy this Alpine SPR 13S, and it was the best option considering the amount invested. I consider this purchase the best value for money in this category of investiment and sound project I have done.

Click Here to see more reviews about: Alpine SPR-13S 5-1/4" Component 2-Way Speaker (Pair)

5-¼ 2-way component, hybrid layered pulp cone, rubber surround, 1" silk dome tweeter, 100W RMS power range, 2-way crossovers.

Buy Now

Click here for more information about Alpine SPR-13S 5-1/4" Component 2-Way Speaker (Pair)

Read More...

Jensen Power760 4-Channel 760 Watt Amplifier (Grey) Review

Jensen Power760 4-Channel 760 Watt Amplifier (Grey)
Average Reviews:

(More customer reviews)
I bought this because my 200 watt Pioneer amp died on me, which was powering a 12" sub only. So I upgraded and decided on the Power760 to power the 12" plus 2 6x9's. I couldn't be happier with the sound now. Once I ran a thicker power/ground wire, I started everything up and all is good now. This is really a great amp for the price. I've only had it a couple weeks, but so far so good.

Click Here to see more reviews about: Jensen Power760 4-Channel 760 Watt Amplifier (Grey)

Jensen power 760 hi-fi amplifier (4-channel, 760-watt) * 2 Stable ; variable low pass filters 40 hz240 hz (12 db per octave); variable high pass filters 40 hz400 hz (12 db per octave); variable bass boost 012 db at 45 hz ; low level pass trough rcas (channel 1 & 2 only) ; encapsulated power & speaker connectors;channel-mode selector switch (4/3/2 channels) bridge- / tri-mode capability;tri-mode ; protection circuit that safeguards against short circuits, dc-offset & thermal overload; green operation & red protection leds; 4 channel-amp; peak power: 760w ; nominal output power: 4x75w x 195w ;4x100

Buy NowGet 32% OFF

Click here for more information about Jensen Power760 4-Channel 760 Watt Amplifier (Grey)

Read More...

Rockford Fosgate Punch 300-Watt Mono Amplifier Review

Rockford Fosgate Punch 300-Watt Mono Amplifier
Average Reviews:

(More customer reviews)
I have my Punch 300.1 running at 2ohms on an Alpine Type-R 1242D in a sealed box. The amp is installed underneath my front passenger seat with plenty of room to spare. It hasn't gotten all that hot yet, and it sounds GREAT (especially at extremely high volume...)
The amp itself looks sharp, is well contstructed (all of the inputs, wiring, and adjustment knobs are at one end, which helps to keep things clean & organized when installing), it's very compact, and way more powerful than you might think. These amps come out of the box with a test sheet that is often 100+ watts HIGHER than the rms numbers that are on the stock spec sheet. This is a nice surprise for anybody buying one of these new.
Installation is a bit more advanced than other entry level priced amps. There is no on-board fuse for protection, so you'll also have to pick up some kind of inline fuse or fuse block. There are compression wiring terminals that can accept up to 4ga power/ground connections. The large size power/ground wiring terminals are obviously needed, because this little amp is also a power hog. It's probably a good idea to add a stiffening cap to your system if you're going to crank it up, because Rockford amps don't tend to be overly efficient. That being said, I've been pounding away on my system and my headlights haven't dimmed out yet... but I do have a Tundra with a V-8 that can handle more demanding power draws on the stock alternator than a smaller engine.
However, I would like if the adjustment knobs were more accessible because the downside to the amp design is that it can be difficult to reach the recessed dials depending on your installation. A lot of people probably won't care though, because "normal" people (not gear heads or stereo geeks) will simply "set & forget" and never touch the dials after installation.
To sum up; this is one of the best little amps I've ever owned. Yes there are some quirks, but you get a lot more out of this entry-level priced amp than you do from other brands in it's price range. If you pair the Punch 300.1 up with an appropriate subwoofer setup, you will not be disappointed.
********************
UPDATE 3/06/2011
"The Little Amp That Could" is still going strong. I like to listen LOUD and I push this thing pretty hard almost every day, and I haven't had a single problem in the six months since I first installed it.

Click Here to see more reviews about: Rockford Fosgate Punch 300-Watt Mono Amplifier

The P300-1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.

P300-1 Features
12dB/octave crossover
4 Gauge power/ground terminals
Audiophile grade speaker connections
MOSFET output stage
MOSFET power supply
Top Mounted LED Indicators

CEA-2006 Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
Differential Inputs Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier.
Discrete Surface Mount DSM--An industry-leading manufacturing process, DSM utilizes high-speed robotics, high-quality 1% tight-tolerance parts and large board traces. The discrete components are laser etched to meet a particular value and a very low tolerance. This lower tolerance improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. These superior components are used by aerospace, automotive, and cellular manufacturers.
Dynamic Thermal Management Heat is often inefficiently dissipated across a heatsink causing "hot spots". This impacts important design goals which are:
Keeping internal components cool.
Maximizing potential of all components.
Reducing distortion for better sound quality.
Increasing efficiency to produce more power.

Rockford Fosgate engineers have developed an award winning cooling design called DTM. This patent pending design seamlessly manages the output of power supply temperatures, while evenly distributing the excess heat across the entire amplifier.
MEHSA3 MEHSA3 (Maximum Efficiency Heat Sink Application - gen. 3) is a proprietary process that yields up to five times better heat transfer than traditional FET mounting techniques, using the exact same components. A multi-layer insulated metal substrate operating with minimal thermal resistance spreads heat both downward & outward to quickly dissipate heat from each device across the heatsink. This process combined with our optimized heatsink designs, DSM (Discrete Surface Mount) technology and MOSFET devices, allows Rockford Fosgate to squeeze more watts per cubic inch from every output device as well as provide consistent thermal stability. The 3rd generation creates a dielectric layer between the ceramic topside and the aluminum base that retains all of the electrical isolation and capacitive coupling of the original MEHSA material increasing it's thermal conductivity. The higher power handling results in a 20% reduction in thermal impedance.
NOMAD NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
Punch EQ2 In the early 70's, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. Jim discovered three problems that were common to all cars:
A midbass hump between 100-275Hz
A steep roll-off of high frequencies from 2kHz up to 20kHz
Reduced bass response below 50Hz

The Punch EQ on-board equalization circuit helps correct for these acoustical deficiencies in the listening environment. When set to Low-Pass(LP) operation, it becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.
TO-247 MOSFETs Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps.
TRANS•ana An award winning studio quality circuit borrowed from the pro audio company Hafler. TRANS-ana is a sound quality circuit that is a standard in the recording industry that simplifies the signal path of the amplifier, allowing the signal to travel through the amplifier at a low voltage. The result: Greater reliability, cleaner performance and exceptional musicality, speed, and durability.
P300-1 Specifications


Thirty Years of Rockford FosgateRockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."
The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.
What's in the Box Rockford Fosgate Punch P300-1 300-Watt Mono Amplifier, User's Manual
More Amplifier Options From Rockford Fosgate If you need more features, step up to the Power Series T500-1BDCP.
On a Tighter Budget? Rockford's also got you covered. Consider the Prime Series R250-1.
Rockford Fosgate Punch Series Power Amplifiers


Buy NowGet 43% OFF

Click here for more information about Rockford Fosgate Punch 300-Watt Mono Amplifier

Read More...

Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier Review

Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier
Average Reviews:

(More customer reviews)
I bought this amplifier to power a JL Audio 10" W1V2 subwoofer (with an RMS rating of approximately 150 watts).
The amplifier arrived in high-quality packaging and included a certificate of testing, indicating that prior to leaving the factory it had functioned properly and produced an RMS wattage higher than its rated value. The set included the necessary fuse and some mounting hardware.
The amplifier is a typical Rockford Fosgate high-quality product. Fit and finish are excellent and the product has a clean, simple design. The terminals and adjustment controls are rugged and well-labeled.
Using a Rockford Fosgate installation kit, which I would recommend due to its similar good value and inclusion of all necessary cables, I was able to install this amplifier in my 1998 Kia Sephia in about an hour, including routing the power cable through the engine bay firewall (the most difficult aspect for me). I connected the signal and switch-on leads to an Alpine iDA-X200 receiver.
Note: After installing and connecting all cables, be sure to turn the gain on the amplifier from "1" (which amplifies by a factor of 1...in other words, not at all) to a higher value, such as "10" for maximum power output. Otherwise, you will not be able to hear any output from the subwoofer or speakers. Also, if connecting to a subwoofer, be sure that the subwoofer is turned on and up to an appropriate level via the stereo receiver.
Once I got everything set up correctly, I tested out the amplifier and was extremely happy with its performance. The bass from my subwoofer is clean, tight, and very loud, and by turning the "bass boost" feature on this amplifier to about halfway, I have more than adequate output with my subwoofer set to 5 of 15 on my receiver.
The best part of this amplifier is its price. With a name like Rockford Fosgate and more than adequate performance for any reasonable music enthusiast (as long as your goal is not simply to be heard from blocks away), you would expect a higher price, but the R150-2 is one of the best value amplifiers that I was able to find, and I am absolutely satisfied with my choice.
I have had this amplifier for a few weeks now and its performance continues to be flawless. It does get very warm, like any amplifier will, but keep enough airspace around it and there should be no problems.

Click Here to see more reviews about: Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier

Rockford Fosgate amplification at an unbelievable value. The R150-2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single R1S410 10" or R1S412 12" woofer.

R150-2 Features
Power and Protect LEDs The Protect LED illuminates if a short circuit or to low of an impedance is detected at the speaker connections. The amplifier will automatically shut down if this occurs.
RCA Input Jacks The industry standard RCA jacks provide an easy connection for signal level input. They are nickel-plated to resist the signal degradation caused by corrosion.
RCA Pass-Thru Jacks This Pass-Thru provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the rear amplifier location.
Gain Control The input gain control is preset to match the output of most source units.
Crossover Switch Selectable switch for 80Hz High-Pass (HP), All Pass (AP), or Low-Pass (LP) operation.
Variable Crossover (Low Pass Only) A built-in 12dB/octave Butterworth filter with a crossover point variable from 50Hz to 250Hz.
Punch Bass The Punch Bass control provides a bass boost up to 12dB @ 45Hz.
R150-2 Specifications


Thirty Years of Rockford FosgateRockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."
The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.
What's in the Box Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier, User's Manual
Need More Amp? Step up to the Punch Series P200-2 200-watt or the Power Series T400-2 400-watt amplifier (or one of many other Rockford options).
Rockford Fosgate Prime Series Amplification


Buy NowGet 50% OFF

Click here for more information about Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier

Read More...